My New Wheels

[misformartin]

Well after a couple months of waiting my girlfriends wheels are finally here.... been about 4 months since the order was placed... and these promise to be on point as far as fitment goes.

Ame Shalen Cx in 3D Chrome




front
http://i141.photobucket.com/albums/r49/Luv705/rims003.jpg
http://i141.photobucket.com/albums/r49/Luv705/rims008.jpg

rear\
http://i141.photobucket.com/albums/r49/Luv705/rims004.jpg
http://i141.photobucket.com/albums/r49/Luv705/rims005.jpg

[SciFion]

NICE! Looks like a three inch lip or maybe more. Also looks like a blue line around the outside of the lip, did you special order them? What model, size and specs? I'm definately :drool:ing!!

[misformartin]

yah rear actually has about 4.5 they were special order and they are Ame Shallen Cx specs are 18x9 rear 18 x 8 front...

[SciFion]

Is the blue line around the outside lip an option with different colors avalable?

[misformartin]

haha nah actually its just a protective tape so i dont scratch the lip.... its they way they shipped it from japan.. lol : )

[SciFion]

Thats a shame, would be cool to be able to order custom colors on the lip.

[misformartin]

would be... but i think taht would get pitted and scratched really easily...

[scion4us]

MARTIN! You keep her away from the curbs and no more driving the xD for you son!:emotions36:

Those are fricking SWEET! Can't wait to see them in person!!!:happy107:

[misformartin]

i know... rofl... im really scarred because she curbed 3 stock tc wheels in the same drive thru... lolz.... im the good driver scotty : P lolz

[katchkillah]

lol hey so you stuck with the 9 i see. lol. i maybe looking to try squeeze 9.5 soon. but will see, may have to put that money into my soon to be venza. and may have some coils for that too coming in. but it's still in the air. but really wanna shove some 9.5 in the rear on the xd.

[misformartin]

haha... yah you could do it.. me and matty when over sizing and measurments.. bad thing is you gonna lose some lip as ur gonna have to run a higher offset... : ) but im happy with about 4 1/2 inches of lip : ) ... : )

[scion4us]

You bringing both rides to Lompoc Martin?:)

[misformartin]

nah only bringing 1 probably the xd... as it gets better mpg than my newly turbo'd box... lolz

[scion4us]

Put the wheels on the ride and take pics already! SHEESH!!!

[misformartin]

cant no tires lolz... : ) and im poor so gonna have to wait about 2 weeks

[TheLittleDeviant]

Get some tires on them! I wanna see pics of the D with some ballin wheels!

[YELOSUB]

Any update? These are gonna be sick!

[katchkillah]

haha... yah you could do it.. me and matty when over sizing and measurments.. bad thing is you gonna lose some lip as ur gonna have to run a higher offset... : ) but im happy with about 4 1/2 inches of lip : ) ... : )

lol true on that. but i wanna try for the width, lip wasn't all a big thing for me and it's always the frosting on the cake. i wanna play with how wide they can go this time without having the rims stick out or requiring some flares. hehehehehe.

[YELOSUB]

cant no tires lolz... : ) and im poor so gonna have to wait about 2 weeks

It's been over a month...Were dying over here...We wanna see some mounted on the car pics...:bleh:

[CXTKRS1]

I like that fat lip.

[SciFion]

I like that fat lip.

Yeah, a fat lip.. Looks sweet. Hey Martin, your wheels are 18X8 Front, and 18X9 Rear. what are your offsets? I PMed you a while ago about the wheels I am interested in, and they are 18X8 Front, and 18X9 Rear, both with a +35 offset. Will they fit?? Seems like you thought they would, I just wanted to be sure.

Here are the ones I want. These come in a staggered fitment with the lip in front at 2 inches, and the lip for the rears at 3 inches. Also will have the red stripe custom painted Hot Lava Orange.. :signs6:

http://www.raderwerks.com/

http://www.raderwerks.com/sites/default/files/rw_wheel_mten80br.png

[YELOSUB]

What are you dropped on? I am running 18 X 8 all the way around and swapped out my TRD for Tanabe DF210's...I only rubbed in the rear on large bumps with the TRD's...With the Tanabe's, I had to grind the rear fender lip...You will be fine in the front, but the 18 X 9 in a 35 offset may rub...

[katchkillah]

well hope this helps, here is what i'm on with tein basics (back is ALL the way down, front got a few more cranks) and have no rubbing issues at all. even loaded up the whole trunk, back seat and front seat with stuff and hit some big dips and didn't rub.

18" x 8.5" +37 NR / 18" x 9" +40 SL

---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------

i think next set i order i'll for sure go 9.5 on the rear. not as excited with 9 on the rear as i thought would be.

[SciFion]

What are you dropped on? I am running 18 X 8 all the way around and swapped out my TRD for Tanabe DF210's...I only rubbed in the rear on large bumps with the TRD's...With the Tanabe's, I had to grind the rear fender lip...You will be fine in the front, but the 18 X 9 in a 35 offset may rub...

I have an RS1 with the TRD springs it came with. With the offset at +35 in the rear what are my options? Cut the inner fender? Or are these wheels just not going to work?

well hope this helps, here is what i'm on with tein basics (back is ALL the way down, front got a few more cranks) and have no rubbing issues at all. even loaded up the whole trunk, back seat and front seat with stuff and hit some big dips and didn't rub.

18" x 8.5" +37 NR / 18" x 9" +40 SL

---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------

i think next set i order i'll for sure go 9.5 on the rear. not as excited with 9 on the rear as i thought would be.

Thanks you guys, I really like the staggered look of those wheels, and I hope with the TRD's the rubbing wont be to bad. If I have to cut the rear fenderwells, I guess I'll break out the grinder.. :boxed:

[katchkillah]

oh fyi, i'm on 205/40's for all 4 tires

[misformartin]

the rear will fit with some stretched tires thats what i run on the xd : ) they fit perfect you need to stretch and roll / cut the inner fender : )

[TheLittleDeviant]

Wait Martin you got the wheels on? Where are the pics? did I miss them somewhere?

[katchkillah]

hey martin what tire size you ended up going with?

[YELOSUB]

Definately need to run a stretched tire...I'm wishing I had a stretched fitment, but unfortunatley I'm running a 225/40/18...CAn't wait for these things to go bald so I can swap them out...If you have to run the 225/40 series, be prepared to do this:

http://i209.photobucket.com/albums/bb107/yelosub/DSC00848.jpg

http://i209.photobucket.com/albums/bb107/yelosub/DSC00849.jpg

[misformartin]

running 225/40/18 fits perfect no rubbing after i cut out the inner fender lip : ) make sure you use some clear nail polish on all that exposed metal so it dont rust : )

[SciFion]

Tim, are you running 18x8 wheels in the rear or 18x9?
Is running a 225/40/18 tire on a 18X9 in. wheel stretched? I want to put these on the rear.
How about a 205/40/18 tire on a 18x8 wheel, stretched? I want these on the front.

[YELOSUB]

Tim, are you running 18x8 wheels in the rear or 18x9?
Is running a 225/40/18 tire on a 18X9 in. wheel stretched? I want to put these on the rear.
How about a 205/40/18 tire on a 18x8 wheel, stretched? I want these on the front.

Ok, gotta remember offset plays a big role...I am running 18 x 8 (35 offset) and dropped on Tanabe DF210 springs...I did rub with this set up so I had to grind inner fender and yes I did use the factory touch up paint to prevent rust...

Now when I ran this same set-up with the TRD springs, I only rubbed in the rear over large bumps...

All this is with a 225/40/18 tire...

225/40/18 on a 18 x 9 is really not that stretched...You could run 215/40/18 or even a 205/40/18 I think...

205/40/18 would be a perfect stretch i would think for 18 x 8...Any others wanna chime in?

[katchkillah]

hope this helps. here's my small stretch. =p

http://img.photobucket.com/albums/v36/katch/white%20xd/stretch1.jpg

---------- Post added at 06:47 PM ---------- Previous post was at 06:47 PM ----------

http://img.photobucket.com/albums/v36/katch/white%20xd/stretch3.jpg

[eight08customs]

Kory should go 18x9 35offset.. screw it just add 10mm spacers.. cheaper! and instead of new wheels bag it!

[katchkillah]

i could. but then i don't wanna list it on my mod list. lol

[TheLittleDeviant]

ok so how do you stretch tires? I asked a few local shops if they could and all of them laughed at the notion...

[misformartin]

alot of tire shops dont know how or wont due it due to liablility reasons... your probably going to have to go a specialty car shop and even some of them wont do it.... when ever they have done mine they have just used highly compressed air to make the tire beads seat although on my xb they need to use hairspray and a lighter to make them seat and then fill them with air... just youtube tire stretching and it will show you a few different ways