PDA

View Full Version : Cold Air Intake


damouse
01-15-2014, 11:41 PM
Hey guys I live where it snows a lot and Im looking to get a cold air intake and not spend a fortune. I also don't want to get water lock due to the fact that most CAI filters go into the wheel well area. Anyone have any suggestions as to what I should get?? Thanks guys!

1sweetxd
03-04-2014, 03:23 AM
build one yourself in an hour or so and about $50 at Autozone. I did mine that way. just buy the tubing, connectors and filter. there is a write up on here.

Jakobepally
05-14-2014, 03:42 PM
When you build it with the Autozone parts, does it cause a check engine light. What did you do with the airflow sensor?

ermann
05-16-2014, 12:40 PM
I went the easy way just took off the air box, threw on a 3 1/2 inch spectre filter, and had my buddy fab a little mounting bracket coming off the battery. SRI is easier and cheaper.

ermann
05-16-2014, 12:43 PM
506

Fairly easy cost under $30 the filter was the most expensive thing

Jakobepally
06-18-2014, 09:20 AM
I agree. The Autozone method is the easiest way and cheapest as well. I have done this method and it sounds great. I feel like there is a noticeable increase in the acceleration response, but this may be in my head because it sounds fast.