camber shims

[JDMJim]

rumor has it there are rear camber shims being worked on. so those that can get low enough and have low enough offsets to require them....they are coming...:party33:

[katchkillah]

that means i need new rims now. =( rofl.

[Resolve]

Holy Sh*t. Who is rumored to be making them and do we know the rumor on how much both Price and camber amount?

[JDMJim]

that info is not given yet, but you guys will find out when the times comes.

[newagestar]

rumor is true iv got the test set on my xd right now. will be sold on realcamber.com. and if you were at miller toyota show this sat in anaheim ca they were on the car

[xd king]

rumor is true iv got the test set on my xd right now. will be sold on realcamber.com. and if you were at miller toyota show this sat in anaheim ca they were on the car

and it looked sick cant wait to see it dumped on coilovers too

[xd_kidd]

now lets see pics of it =p

[newagestar]

I'll try and have pics this weekend

[xd_kidd]

sweet

[Resolve]

rumor is true iv got the test set on my xd right now. will be sold on realcamber.com. and if you were at miller toyota show this sat in anaheim ca they were on the car
Coming from realcamber makes it even better

[Resolve]

I can't wait to see pics

[Cylon_xD]

SO can someone please explain what this camber does to the tires, they must really wear unevenly then, do they not? Or are the wheels also toed-in a bit to offset the wear or something?

[JDMJim]

as i posted, using these shims would allow you to run a wider/lower offset than normal. but since there are about two xD's using really wide/low offsets, we'll see where it goes. if toe is corrected, the wear won;t be that bad. i still wonder at what drop the toe IS corrected

[Resolve]

Ok camber alone will not necessarily eat through the tires any quicker (depending on amount) but in correct toe will eat through the tires more. The cool thing about realcamber.com is their xb shims were able to do up to a -5 degrees without and major wear because the shims also helped keep the toe within tolerances.

If you look on the realcamber.com website they have an aligment sheet showing the results and it you look everything is within normal tolerances except the camber and the -3degree shims actually gave like -4 degrees.

Again since the toe and all is still in tolerances the tires will not eat through tires that much faster than normal. Plus it can/will help with cornering.

Hope that helps

---------- Post added at 10:42 AM ---------- Previous post was at 10:38 AM ----------

as i posted, using these shims would allow you to run a wider/lower offset than normal. but since there are about two xD's using really wide/low offsets, we'll see where it goes. if toe is corrected, the wear won;t be that bad. i still wonder at what drop the toe IS corrected

I hope they do I am working on the wife letting me get some. I think I can persuade her. I just really want these to help with the looki want to go with

[Cylon_xD]

OK, well gee, I really could use these all the way around, all 4 of my tires scrape the wheel well liners at the lip over any little dip... I've got a bit too much offset for the height I'm sitting at...and I don't want to buy new wheels again, already my second set.

[Resolve]

Well the camber plates would only be for the back. In the front you would need camber bolts and you can get those to do -2 degrees

[dancar420]

well hello everyone. yes the rumors are true. there will be camber for the xD. realcamber is my site and doings lol. I have these things dialed in really good. you guys wont be disappointed with these things. my camber has been on the market for over 2 years now and counting. and still the best out there. here is a little preview of them.
http://i184.photobucket.com/albums/x87/dancar420/035.jpg
http://i184.photobucket.com/albums/x87/dancar420/008-4.jpg

---------- Post added at 06:47 PM ---------- Previous post was at 06:44 PM ----------

also I dont know if I can get a gauging intrest thread or just do it here. anyone who is interested in these can post here if they want. or if I need to make a new thread thats fine too. until I can get a paypal button setup for these we can do it on this site. I am still changing a couple of things also on these. and the set I am working on will be done this friday prolly. so after I try these ones out again I will start production of these things really soon

[newagestar]

dan ill send you a pic of the xd after dumped on coilovers .and ill check and see if the toe stayed or changed. so far tire wear isnt showing anything yet but the trip to az will be its biggest test. ill keep u posted

[dancar420]

sweet I will be waiting :D

[katchkillah]

welcome to the site dan. really interested in these but i'll have to grab another set of rims first. so we will see. i don't think i like the look of my set up if i threw these on.

[dancar420]

well I might make spacers too. if that even helps lol

[xDizzle]

how much do the cost??

[dancar420]

not sure as of yet. cause I havent got the full cost of having them made. but prolly going to be like $180 to $160 shipped and paypal included

[Resolve]

I'm interested but have to persuade the wife and get the money. :(

[katchkillah]

well I might make spacers too. if that even helps lol

thanks dan. but then it will keep me from ordering a more aggressive setup. lol.

[dancar420]

is anyone even interested in camber for the xD? I dont want to make these if no one is even interested in them.

[Resolve]

is anyone even interested in camber for the xD? I dont want to make these if no one is even interested in them.I am very very interested but unfortunately I just moved into my new place this past week and am beyond broke right now and my wife is looking for a job also.

I would love to have some so I could be like the first in this area to have them again money is just evading me right now. :(

---------- Post added at 09:06 AM ---------- Previous post was at 09:05 AM ----------

Worst case scenario how much would it possible be for a one off set down the road like a couple of months? if that is even possible.

[misformartin]

Hey danny i hit you up about these a while ago.. still interested let me know when these are done

[qazyip]

is anyone even interested in camber for the xD? I dont want to make these if no one is even interested in them.


Please make it for sure, I have been looking around for a while. I just bought the front kit and ready to install it, I really need the Rear side to make my D prefectxDDDD

[TheLittleDeviant]

I most likely will be looking to pick up a set as well, although it wont be used on my xD, but instead the new tC I am grabbing, also spacers would be pretty nice too...

[newagestar]

dont think they will work on the tc

[xDizzle]

im interested in these alot

[dancar420]

ok well thats good to hear. as for the tc they wont work. that is a totally different style of suspension. and yes martin I remember. hit me up lets get it going.

I will have these made. but I am only going to make like 100 of them. 50 pairs of -3 and 50 pairs of -5

[JDMJim]

might fit the new tC tho

[newagestar]

no its probly going to have independent like the current

[xDizzle]

do u hav pix of each?? which 1 is better -3 -5?

[JDMJim]

new tC has same rear end as xB2

[misformartin]

Really not anyone which is better depends on look your trying to achieve as most the time people camber to fit aggressive wheels... im ready w/e u are danny... just let me know : )

[newagestar]

cuz its a daily driver and dont want to buy tires every few months i went with the -3

http://img.photobucket.com/albums/v224/newagestar/dfg.jpg

http://img.photobucket.com/albums/v224/newagestar/asde.jpg

[Resolve]

I MAYBE ready in as soon as a couple of weeks to get a set if and when they are ready. just need to know more exact price.

I may have enough after my bonus to get a set after I set aside some for other bills.

[dancar420]

the price is going to be the same as my other shims. which is $160 shipped and paypal included.

[qazyip]

the price is going to be the same as my other shims. which is $160 shipped and paypal included.

save a pair for me plz. DO you know when is it available?

[dancar420]

there will be enough of them prolly going to make 100 sets of them

and they will be available once I go to the machine shop to have them started and made.

[newagestar]

dan when did you want to do final install? im bissy this weekend but anytime after just call me up

[xd_kidd]

im interested. my question though. can these shims handle abuse a bit of rough roads or agressive driving?

[newagestar]

i live on a dirt road and the freeways in socal suck with pot holes so ya so far iv had no problems

[xDizzle]

off topic....xdkidd can u send me a pic of ur headlights?? if u dnt mind

[xd_kidd]

off topic....xdkidd can u send me a pic of ur headlights?? if u dnt mind

ii do mind actually.. sike nah lol

http://i47.tinypic.com/dlkmmb.jpg

[firstkingofbeer]

so i take it there wasnt enough interest for these?

[xDizzle]

ii do mind actually.. sike nah lol

http://i47.tinypic.com/dlkmmb.jpg

did u do them with paint??

[xd_kidd]

did u do them with paint??

si, thats what spanish ppl are good at haha.

[XBjames]

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1365.snc4/163718_1277739119996_1725562401_503943_4565417_n.j pgso here is my -3 REALcamber...

[xd king]

and here is my -5 realcamber shims
http://i16.photobucket.com/albums/b2/sublime12987/-5camber.jpg