Borla Exhaust

[TannerTAKLarson]

Where can I get a Borla Exhaust for the xD because I cannot find one online or maybe I am just searching in the wrong places. After hearing it there is no going back. Any suggestions as to where I can find one?

Thanks.

[CXTKRS1]

Borla does not have an axle or cat back made for the xD, you will have to find a Borla muffler that fits and have an exhaust shop fab you up something.

[robbiej]

I had a Borla on my xA and loved it. Thought about taking it off before I traded it in and try to make it fit the xD, but let it go with the car.

[TannerTAKLarson]

alright well if so what is the next best exhaust system that I could purchase?

[YELOSUB]

I love my strup exhaust...Best place to get it at is fastscions.com...Here are my vidoe links on youtube:

http://www.youtube.com/watch?v=TSe_024PRws

http://www.youtube.com/watch?v=h-lwMU3e3zg

http://www.youtube.com/watch?v=zcRHb5JKct4

[CXTKRS1]

I love my precision-muffler exhaust which uses a Mangaflow muffler. Cruising around at 2000 RPM gives you nice deep tone that sounds so nice. In reality the Mangaflow, Strup, DC Sports, TRD, or any other brand will not give you the same sound as a Borla. Check the local shops to see what they would charge you and make sure to explain you want a axle back and not a cat-back. You could probably have everything done for the same price as one of the cheaper axle back kits.

[KILLA XD]

I'm running with the magnaflow exhaust and I love it.

[TannerTAKLarson]

I love my strup exhaust...Best place to get it at is fastscions.com...Here are my vidoe links on youtube:

http://www.youtube.com/watch?v=TSe_024PRws

http://www.youtube.com/watch?v=h-lwMU3e3zg

http://www.youtube.com/watch?v=zcRHb5JKct4

Hey I like the exhaust sound, does it give any noticeable power? Im running a CAI and it shows some pull. Also what tailights do you have I really like the smoky look to them.

[YELOSUB]

Hey I like the exhaust sound, does it give any noticeable power? Im running a CAI and it shows some pull. Also what tailights do you have I really like the smoky look to them.

Stock tails that I had smoked and added some hot lava too...As far as power, butt dyno says a little bit and it did help my mpg by 2-3 or so...

[Jay Smyles]

Here's an xD with Borla exhaust.. sounds pretty sick, but whoever did the job definatley half assed it. Muffler looks all crooked and $%!t

http://www.youtube.com/watch#!v=dHsJk9O9FWI&feature=related

[TannerTAKLarson]

Here's an xD with Borla exhaust.. sounds pretty sick, but whoever did the job definatley half assed it. Muffler looks all crooked and $%!t

http://www.youtube.com/watch#!v=dHsJk9O9FWI&feature=related

Yeah this is the one video that inspired me to get one but it just seems like too much of a hassel to get one. So I am going to go with the next best, a STRUP exhaust.

---------- Post added at 11:34 PM ---------- Previous post was at 11:32 PM ----------

Stock tails that I had smoked and added some hot lava too...As far as power, butt dyno says a little bit and it did help my mpg by 2-3 or so...

Right on I see, well at least it helped mileage and it sounds amazing. I think im going to get one as soon as I get that paycheck!

[Jay Smyles]

you could find a good muffler shop and they will be able to make it straight for ya

[CXTKRS1]

you could find a good muffler shop and they will be able to make it straight for ya

Yep the bends on the axle back are not hard to recreate at all.

[TannerTAKLarson]

Ok well what borla exhaust would i have to get to minimize the custom fitting. the nissan versa?

[CXTKRS1]

Ok well what borla exhaust would i have to get to minimize the custom fitting. the nissan versa?

Ok well what borla exhaust would i have to get to minimize the custom fitting. the nissan versa?

No, their are a few ways you can go about doing it. You can call Borla itself or jegs/summit and explain what you are trying to do (they may ask for measurements). They should be able to recommend you a p/n and then you either buy from them or try another site to see if you can find the muffler cheaper. Whatever muffler shop you bring it to should have all the piping, hangers, and flange to make an axle back style exhaust.

http://www.jegs.com/webapp/wcs/stores/servlet/KeywordSearchCmd?storeId=10001&catalogId=10002&langId=-1&N=0&Ntk=all&Jnar=0&Ne=1%2B2%2B3%2B1147708&searchTerm=borla+muffler+2.25

http://www.summitracing.com/search/?keyword=borla%20muffler%202.25&dds=1

Both Summit and Jegs carry the muffler you will probably need.

[Jay Smyles]

dead on!

[TannerTAKLarson]

Thank you Thank you Thank you. Now just to find a how much it is gonna cost me to get the axle back made.

[Jay Smyles]

shouldnt be too much of a bill at all. Just lube up if you take it to meineke! lol