Scion XD Forum

Scion XD Forum (http://www.scionxdforum.com/forum/index.php)
-   Suspension (http://www.scionxdforum.com/forum/forumdisplay.php?f=6)
-   -   What springs are you running? (http://www.scionxdforum.com/forum/showthread.php?t=822)

xd_kidd 02-10-2011 02:45 PM

no just the yaris.

robbiej 02-10-2011 05:34 PM

Well, I ended up getting the Tein's, arrived today. I'll post up thoughts and pis after I get them on and they settle.

1sweetxd 03-17-2011 04:02 PM

1 Attachment(s)
im running the TRD 2" lowering springs on mine. everything else is stock. would still like it to be an inch lower or so. i just want to eliminate the space between the tires and the fenders

XBjames 03-18-2011 01:51 AM

i cant post a FS thread yet but if anyoen is interested in springs i will have tanabe DFs for sale. only used for about 500 miles

Vengeful Squid 04-12-2011 04:13 PM

Quote:

Originally Posted by 1sweetxd (Post 9959)
im running the TRD 2" lowering springs on mine. everything else is stock. would still like it to be an inch lower or so. i just want to eliminate the space between the tires and the fenders

how did your TRDs lower by 2"?? everywhere i've looked it says 1-1.5"

robbiej 04-12-2011 05:04 PM

Yeah, TRD's are only 1.5" drop.

1sweetxd 04-12-2011 05:06 PM

thats what the scion dealer had told me they were. scion just labeled them "lowering springs". the dealer told me 2 inches. since i never got out with a tape measure, i took his word for it. after getting on here, i found out i actually had a smaller drop than 2"

robbiej 04-12-2011 05:15 PM

Its all good. The salesman doesn't know most of the time. They don't all read the specs, just figure lowering springs must be 2", lol. They are good springs, I just wanted to go lower so I sold mine and bought Tein's. The TRD's do make the car look better than stock.

SciFion 04-12-2011 10:21 PM

And handle better..

1sweetxd 04-13-2011 07:30 AM

True. you can tell its lowered if im parked next to a stock one. lol. i like how it looks, so im not in a hurry to do anything just yet. i've only had the car a month. haha. but i still wanna go a little lower so eventually if i find a good deal on some other springs or can find a good trade or something with the TRDs then that would be an option. gonna roll it like it is for a while and concentrate on other things to work on.

just got the billet grille for my bumper put on yesterday. the upper billet grille should be here in a few days. will have pics after that. then it's on to the interior for some paint and stuff.

thanks for the info guys.

Vengeful Squid 04-13-2011 11:07 PM

1sweetxd you have the modbug just like me LOL. my 2011 is still getting payments so i have to restrain myself from molding...you have no idea how hard that is to do. hey so if you are gonna sell your TRD springs----well, give me a holler!

1sweetxd 04-14-2011 07:14 AM

you have no idea!! i've just had the car a month and i have a million things i wanna do. haha. once i get the rest of my grille and get some paint on the inside, im prolly gonna let her ride for a while after that. i figure that's a good stopping point. at least for now.

i will definitely keep you in mind squid if i decide to sell my springs.

sch3nk 04-14-2011 09:36 AM

I'm looking into the Tein's. I had a set on my old WRX, and LOVED them. Obviously they only offer basic's for the xD. I don't want to drop the car by much if at all, so this does not bother me.

What do you guys mean when you say "soft"? Are they nicer than stock? I hate the stock suspension. But i like my suspension tight as i can get it. Gonna be doing full sway's and bar's and the likes. Are the Tein's worth it though? Any thoughts?

xd_kidd 04-14-2011 11:30 AM

idk if u wanna go all low.. im on coilers.. went alil below from the tire cause ii have the tire and fender gap and hit a bad curb due to slippery roads and it was bleeding from the oil pan:emotions122: haha. but yea slammed looks good. thats why ii still haven't raised it lol

1sweetxd 08-18-2011 02:55 PM

just got my Tein S-Tech's in today!!! im gonna do my best to get some time this weekend to get them put on. i will post pics as soon as i get it done. can't wait!!

jester4666 08-18-2011 07:25 PM

i'm happy with my stock TRDs. i can't go any lower with the roads i run on everyday. the 18" wheels make up the gap pretty good.

1sweetxd 08-22-2011 08:06 AM

3 Attachment(s)
just installed my new Tein S-Techs this weekend. really quick install and it looks sick!! eliminated all of the wheel gap. i will have some better pictures up in a day or two.


BTW....how do i post larger pictures here in the thread? rather than using the smaller attachments? for some reason i can't figure it out. ha.

YELOSUB 08-22-2011 10:07 AM

Man I should have got the S-Techs...That drop looks great...By the way, I upload using photobucket.com

htheduck 08-22-2011 11:03 AM

Quote:

Originally Posted by 1sweetxd (Post 11662)
just installed my new Tein S-Techs this weekend. really quick install and it looks sick!! eliminated all of the wheel gap. i will have some better pictures up in a day or two.
BTW....how do i post larger pictures here in the thread? rather than using the smaller attachments? for some reason i can't figure it out. ha.

Nice job.

For your next set of better pics-take them from the other side: where the sun shines light to the side of the car you want to see.

We're looking at shadows and trying to see a drop.

1sweetxd 08-22-2011 11:51 AM

sorry bout that duck. i'll do better next time. lol.


also, i've noticed that when i come down off a bump or a dip, that something is rubbing on the driver side front. sounds like either my tire is rubbing the inside fender well or it sounds like im hitting and scraping the road. well, i know im not low enough to hit the ground. and i've gotten down and looked in the fender well and didn't notice any rub marks on the tire or the plastic. next, im gonna take the wheel and tire off and take a look. any ideas on what could be causing the rubbing? or where i should look first.

i know several people are running the S-Techs on 18's so clearance shouldn't be an issue. im sure its an easy fix. i may just need to take the spring out and re-install to make sure all alignment is correct


All times are GMT -5. The time now is 08:42 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.