| YELOSUB |
01-21-2010 09:44 PM |
Quote:
Originally Posted by rhino74s
(Post 4033)
so you have TRD springs then, you could prolly do +35 offset with those. Generally the lower the offset the deeper or more lip the wheel has. That's why we're limited on deep dish wheels, we don't have alot of space under there for really low offsets.
|
Ryan speaks the truth...I have experimented with several offsets by using Randode.com spacers...Here is what I found:
18" x 7.5" Enkei Super7's in a 45 offset/TRD Springs/No rubbing
18" x 7.5" Enkei Super7's in a 45 offset/TRD Springs/with 10mm Randode Spacers only rubbed in rear on BIG bumps
18" x 8" Axis Decades in a 35 offset/Tanabe DF210's/with 10mm Randode Spacers/Will not fit even after grinding inner fender
18" x 8" Axis Decades in a 35 offset/Tanabe DF210's/with 5mm Randode Spacers/Rubs too much to drive, need to run a stretched tire
18" x 8" Axis Decades in a 35 offset/Tanabe DF210's/Grinded Inner Fender Lip Down/ No Rubbing |
