Just Ordered New Shoes(Axis Decades are Mounted/PICS)
 

Ok, well since I'm not going turbo I'm using the money I'm getting back in return to do other things to my ride...Well so far you have seen my Clazzio interior, shark fin antenna, and interior and engine bay lighting...Well a couple days ago I was browsing the Sponsored Sales section of SL and came across a vendor selling Axis Decade Rims at 60% off...Now these included the rear rims with the Maxis lip, that's a 3.25 inch lip...So I couldn't resist and ordered up a set of 18x8, 35 offset, Axis Decades in staggered fit to replace my 18" Enkei EMX Super 7's...They are being delivered to my house tomorrow at a cost of $540 SHIPPED. Now for those that know about these rims, they usually run close to $275 to $325 a rim depending on the site...I also plan to switch out my TRD springs for Tanabe DF210's...

For those interested, here is the link on SL for the seller of the rims:

http://www.scionlife.com/forums/showthread.php?t=167379

Sweet deal on some sweet rims, post up pics when you get them on.

Very nice looking rims.

Seen them on a Hot Lava and they just don't look right. Now, if they were available in black I would rock them for sure! Nice staggered fitment!

At this price, nothing a little paint on the spokes couldn't fix...Man the service I got from Ryan over at Next Level Motoring was fantastic...Got the rims in two days...Anyways, on to some pics...Most of you know my fiasco with Todd from TT...Anyways, the only money I had laying around for the "money shot" pics was the partial payment that he just recently sent me...I found it fitting to use it for the pics'...

Maxis Rear:

http://i209.photobucket.com/albums/b...b/IMG_0097.jpg

http://i209.photobucket.com/albums/b...b/IMG_0094.jpg

http://i209.photobucket.com/albums/b...b/IMG_0100.jpg

http://i209.photobucket.com/albums/b...b/IMG_0099.jpg

And a few more:

http://i209.photobucket.com/albums/b...b/IMG_0095.jpg

http://i209.photobucket.com/albums/b...b/IMG_0096.jpg

Set the rear up on the lugs to check fitment...Man these are gonna be flush...Don't mind the dirty car or the owie on the bumper...

http://i209.photobucket.com/albums/b...b/IMG_0102.jpg

man thats going to look nice, maybe I will get a set myself, and like you said toss some paint on the spokes

Thx man...At that price why not...Look on ebay and see what they are going for...Ridiculous...I may powder coat the inner part down the road and leave the nice chrome lip...But for now, I'm gonna leave them alone...

Just for the record...I went 35 offset for both front and rear...

Ok there on and I love them...They sit almost perfectly flush and I have zero rubbing issues...Love the look of the massive rear lip...I will be swapping out my TRD springs for some Tanabe DF210's so I can sit a little lower which I think will make it look even better...May get some lugs powder coated HOT LAVA to get some color on the rims...Here are the pics, let me know what you think...I would love to see someone get these and powder coat/paint the center spokes a different color (i.e. BLACK, HOT LAVA, BRONZE, GOLD)...That would look killer...

***PS***You can also see the wiper cowl piece that is still in the mock-up stage and is almost done...I love the way it looks...Also, you notice on my lower side skirt that a sponsor is missing? Thanks TurboToyotas...

http://i209.photobucket.com/albums/b...b/IMG_0116.jpg


http://i209.photobucket.com/albums/b...b/IMG_0105.jpg


http://i209.photobucket.com/albums/b...b/IMG_0114.jpg


http://i209.photobucket.com/albums/b...b/IMG_0112.jpg

Hate that you can only post (4) images...Here are some more...

http://i209.photobucket.com/albums/b...b/IMG_0115.jpg


http://i209.photobucket.com/albums/b...b/IMG_0106.jpg


http://i209.photobucket.com/albums/b...b/IMG_0107.jpg


http://i209.photobucket.com/albums/b...b/IMG_0108.jpg

Last one:

http://i209.photobucket.com/albums/b...IMG_0110-1.jpg

Damn, they look good! and your right, they would look killer with some color on them

look good... rear can be spaced out like 5 mil.. some camber and slam it... good game... will look hard as eff...

ditto

yeah, car deff needs moAr low, and maybe a smaller tire... white size tire are you running?

I agree with the 5mm spacer...I'm running 225/40/18 which is perfect size tire IMO...

true but you may start to rub when you go lower.

What are your rim and tire specs?

245/40R17's on my xD, If I had stock bumpers I would not rub, but my kit is shaped oddly on the inside so I occasionally get a little "eerrrtt..." I have been meaning to shave the inside down a little but havent gotten around to it yet...

Well Randode made a 5mm and 10mm so we decided to try bigger first (10mm). I think it turned out perfect...It is FLUSH and when I did the fake curb and emergency brake tuck job, the rear tucked and cambered quite nicely...Not sure if I will rub obviously because I can't drive like that but it does look sick slammed...My Tanabe DF210 springs arrived yesterday and I'm going to Randode's house Sunday to install them...Here is the new look with 10mm added...Go to the first post for comparison pics...

http://i209.photobucket.com/albums/b...mPassSide1.jpg

http://i209.photobucket.com/albums/b...mPassSide2.jpg

http://i209.photobucket.com/albums/b...mPassSide3.jpg

http://i209.photobucket.com/albums/b...arEnd10mm1.jpg