Did You Know About Your Starter ?
For those that do not know, Your start position on the key does not have to be held in start position till the engine starts. Just a tap till the starter turns and it will continue till the engine starts. Even if you let the key go back to the on position. That's why a "Pust-To-Start" button works on the XD. It keeps turning till the engine starts. If the engine has a hard start and does not fire up, just turn the key to OFF and the starter will stop turning. :happy107:
|
hmmm.... so does anyone know how to wire up a push button start for the xD then?
|
I have been looking into it lately, I spoke with Luci, who is running a push start in his RS1 and he said you would need to use an alarm to accomplish a push button, but I am pretty sure that we can wire in a switch to the starter and be able to just throw the key in the ignition and then push the button. I am going to look into some of the wiring schematics and see if I can figure it out. I will keep everyone posted how I fair.
|
cool, I've been sitting on a push start button from a Prius for awhile now.
|
I already installed mine more than a year ago. The button is from Pivot Racing, I cut the black wire from the IGN sw and tied it to one terminal of the start button. The other one went to a "hot with key on" line at the fuse block and I think it was a pink wire. I also made the illuminating blink with the key on and extinguish when the motor was running. I used the hole thingie on the right side of the steering column, and it's convenient there coz I turn the key on and poke the button. By the time I get my seatbelt on, the engine is already started. Here's what it looks like.
http://i602.photobucket.com/albums/t...rtButton-1.jpg |
All times are GMT -5. The time now is 09:32 PM. |
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.