Questing for "Hella Flush"
 

For those not on ScionLife:

With the lack of any kind of particularly aggressive fitments among the xd owners here, i've decided to try my own luck at achieving a nice, aggresive fitment.

This thread is more or less for my amusement and to keep up with the status as it progresses, milestones, measurements things of that nature.

I'll start the thread with a little bit of basic information:

My car:
http://farm5.static.flickr.com/4092/...2ccfa7fd_b.jpg


2009 Scion xD, Silver
Current Suspension: K-Sport Coilovers
Current Rims: O.Z. Racing Ultralagerras
Current Rim Size: 16x7 +35 Offset
Current Tires: 205/55/16

Now for a teaser:
http://farm5.static.flickr.com/4133/...af8f753d_b.jpg

New Rims: Corvette Sawblades
New Rim Size: 17x9.5 +56 (After adapters: Front: +40ish Rear: ????????)
New Tires: ??????????

Camber needed:
Front: ????????
Rear: ???????

Fenders rolled / pulled: ?????????

Part 1: Determining my desired offset

The particular wheels in question were picked due to the high width and high offset. The high offset is used as a buffer zone since I was unable to get any information on fitting 9.5" wide wheels at a fairly aggressive offset on the xD. Tomorrow i start taking wheels off, taking measurements, snapping pictures, and once ive gotten my comfortable measurements, and a couple extra bucks on the side, I order my spacers/adapters.

UPDATE: 10-6

Sorry i havnt been active for a couple days, works been insane, with so many big projects and giving the sig other whatevers left.

Yesterday I managed to get out in the pretty fall louisiana weather and do some testing on the front. To my surprise there is tons of room with coilovers installed, and clearance to the offset i want looks to be manageable. not an insane amount of poke, just enough for what i want.

Used a 1/2" piece of plywood to create a temporary spacer since i dont have the parts to mount anything properly yet.

pic's of the front ftw, dirty car ftl:

http://farm5.static.flickr.com/4154/...16b867d9_b.jpg

http://farm5.static.flickr.com/4153/...0c7da753_b.jpg

http://farm5.static.flickr.com/4124/...cfcc0ba0_b.jpg

http://farm5.static.flickr.com/4132/...ab7f661d_b.jpg

Also since i was able to put them on and get an idea and feel more comfortable about the rim selection now.

These are the rims im going to be fitting:

http://farm5.static.flickr.com/4103/...a8d63c06_b.jpg

Set of rear sawblade wheels from an old vette c4.

Camber, and tire size are still going to be dependant on how friendly the fenders are rolling wize. but judging by what i see, 225's are no longer in the question and size range will be 205-215/45.

Will have more next time im able to get into the driveway with spare time.

Update 10-19-10

This weekend I saw a FS thread on the Vdub forums for a set of corvette adapters at 20mm all the way around, for a really good price. After going back and forth with the guy for a little while I found out the adapters were 1 of the 2 brands i was looking for, and a quick paypal later, they were being shipped to my door.

I was skeptical of the clearance 20mm would give me in the back, since in my previous measurements i was eyeing closer to 30mm spacers on the rear, but 20mm is what i wanted for the front. I figured worse case scenario i either a) grab a pair of Randode's spacer shims or b) order another pair of adapters and then id have a pair of spares.

well lets just say i was pleasantly surprised with both front and back fitments when i test mounted today.

the front is about as far as i expected from the suspension, and when i tested turning at full lock in each direction, cleared 100% everything else cleared, and did well.

Then was the rears. I mounted them up and looked closely. It seems that there is maybe a finger gap of clearance between the wheel and the suspension. I am still thinking that maybe another 10mm or so may be in order for the rears. I need opinions or experiences of how close you can get to the suspension out back guys.

rim / fender fitment

Will let the pics speak for themselves:

Front:

http://farm5.static.flickr.com/4088/...38ea5e0c_b.jpg

http://farm5.static.flickr.com/4132/...4df7c10d_b.jpg

http://farm5.static.flickr.com/4130/...da918331_b.jpg

http://farm5.static.flickr.com/4151/...d007d88d_b.jpg

http://farm5.static.flickr.com/4127/...db85f0eb_b.jpg

Rear:

http://farm5.static.flickr.com/4085/...95ae7801_b.jpg

http://farm5.static.flickr.com/4151/...754e6305_b.jpg

http://farm5.static.flickr.com/4130/...fcd28eb9_b.jpg

http://farm5.static.flickr.com/4090/...e19dea37_b.jpg

http://farm5.static.flickr.com/4110/...f893b845_b.jpg

well i'll be the first to show interest here. saw the post on scionlife too but better get the interest started here. gl hf and cant wait for results :favorites13:

good luck on this. i wanna see how the front comes along. the rear i don't see any issues as i should've went that route with 9.5 instead of only a 9.:emotions122:

Awesome cant wait to see deff want to see at Scion De Gras 2

updated^^

sick i cant wait to see it when its done
im also planning on going with the hella flush look

good luck.. cant wait to see the finished product

Update Tomorrow
 

I'm really upset with myself right now. The cable for my Nikon is at the office today, so no pics until tomorrow.

This weekend I saw a FS thread on the Vdub forums for a set of corvette adapters at 20mm all the way around, for a really good price. After going back and forth with the guy for a little while I found out the adapters were 1 of the 2 brands i was looking for, and a quick paypal later, they were being shipped to my door.

I was skeptical of the clearance 20mm would give me in the back, since in my previous measurements i was eyeing closer to 30mm spacers on the rear, but 20mm is what i wanted for the front. I figured worse case scenario i either a) grab a pair of Randode's spacer shims or b) order another pair of adapters and then id have a pair of spares.

well lets just say i was pleasantly surprised with both front and back fitments when i test mounted today.

the front is about as far as i expected from the suspension, and when i tested turning at full lock in each direction, cleared 100% everything else cleared, and did well.

Then was the rears. I mounted them up and looked closely. It seems that there is maybe a finger gap of clearance between the wheel and the suspension. I am still thinking that maybe another 10mm or so may be in order for the rears. I need opinions or experiences of how close you can get to the suspension out back guys.

As for the outside fitment compared to the fenders. You get to wait for tomorrow. Pictures tell the full tale. and I dont think i can be any happier with it.

Updated Original Post^^

gonna look sick!!! wish i could do that and throw some bags on. but since this is my daily driven sales car gotta stick with coils. but really like that nice tucked look.

This is my DD too, and our roads arent the best, but oh well. I prefer my coilovers too to bags, i just wish i could make the back sit lower. Did you have that problem with the Tiens in the back? I'm probably going to fiddle with the adjustment on the shocks and put some preload on my springs to get 1/2-1" lower. need to be tucking tire in the back for this setup to look the way i want. i just gotta watch because k-sport springs arent the stiffest. Dont need to be fender banging.

i just coilovers!!!! i cant wait to install them
now i just need some wiiiddde rims

Better late than never. cash flow for things like rims and tires kinda slowed down there for the last month. After trying my own hand at polishing, i can say ill never be trying that again. Instead decided to drop off at the powder coaters. I wanted the selection to be a love/hate type of choice, and not as much something everybody would like and not love. Got my tires in this week, went to my shop and got them mounted, installed everything last night. more pictures when the sun stops being a total B**** Boat. but this is where shes at:

http://farm5.static.flickr.com/4132/...0c047311_b.jpg

More low in the back planned for this weekend

Damn..... I hope the sun quits being a *%*&^ soon so you can post some pics from dead on the front and back.

If you put a thin film of Vasaline on your fenders it makes getting the rubber residue off much easier.

:)

Looks like all your effort really paid off.

Looks great, glad you took the center caps off too. :)

as requested.. took these same day but didnt post them, and got busy with the holidays all weekend. Hope everyone had a good turkey day:

http://farm6.static.flickr.com/5204/...f1c66990_b.jpg

http://farm5.static.flickr.com/4132/...913c398b_b.jpg

What the hell is that pink thing hanging from your rear bumper?

Just a random stuffed doll haha, its off the car now, i run dolls and charms every now and again depending on the mood, girls always think their cute, and draws goofy comments.

I salute you sir :favorites13:

Well done.

---------- Post added at 11:02 PM ---------- Previous post was at 10:58 PM ----------

I thought they were Pikachu testes...

pikachu wishes. too big even if he was level 100. blastoise and genera ftw lol