camber shims
 

rumor has it there are rear camber shims being worked on. so those that can get low enough and have low enough offsets to require them....they are coming...:party33:

that means i need new rims now. =( rofl.

Holy Sh*t. Who is rumored to be making them and do we know the rumor on how much both Price and camber amount?

that info is not given yet, but you guys will find out when the times comes.

rumor is true iv got the test set on my xd right now. will be sold on realcamber.com. and if you were at miller toyota show this sat in anaheim ca they were on the car

and it looked sick cant wait to see it dumped on coilovers too

now lets see pics of it =p

I'll try and have pics this weekend

sweet

Coming from realcamber makes it even better

I can't wait to see pics

SO can someone please explain what this camber does to the tires, they must really wear unevenly then, do they not? Or are the wheels also toed-in a bit to offset the wear or something?

as i posted, using these shims would allow you to run a wider/lower offset than normal. but since there are about two xD's using really wide/low offsets, we'll see where it goes. if toe is corrected, the wear won;t be that bad. i still wonder at what drop the toe IS corrected

Ok camber alone will not necessarily eat through the tires any quicker (depending on amount) but in correct toe will eat through the tires more. The cool thing about realcamber.com is their xb shims were able to do up to a -5 degrees without and major wear because the shims also helped keep the toe within tolerances.

If you look on the realcamber.com website they have an aligment sheet showing the results and it you look everything is within normal tolerances except the camber and the -3degree shims actually gave like -4 degrees.

Again since the toe and all is still in tolerances the tires will not eat through tires that much faster than normal. Plus it can/will help with cornering.

Hope that helps

---------- Post added at 10:42 AM ---------- Previous post was at 10:38 AM ----------

I hope they do I am working on the wife letting me get some. I think I can persuade her. I just really want these to help with the looki want to go with

OK, well gee, I really could use these all the way around, all 4 of my tires scrape the wheel well liners at the lip over any little dip... I've got a bit too much offset for the height I'm sitting at...and I don't want to buy new wheels again, already my second set.

Well the camber plates would only be for the back. In the front you would need camber bolts and you can get those to do -2 degrees

well hello everyone. yes the rumors are true. there will be camber for the xD. realcamber is my site and doings lol. I have these things dialed in really good. you guys wont be disappointed with these things. my camber has been on the market for over 2 years now and counting. and still the best out there. here is a little preview of them.
http://i184.photobucket.com/albums/x...car420/035.jpg
http://i184.photobucket.com/albums/x...r420/008-4.jpg

---------- Post added at 06:47 PM ---------- Previous post was at 06:44 PM ----------

also I dont know if I can get a gauging intrest thread or just do it here. anyone who is interested in these can post here if they want. or if I need to make a new thread thats fine too. until I can get a paypal button setup for these we can do it on this site. I am still changing a couple of things also on these. and the set I am working on will be done this friday prolly. so after I try these ones out again I will start production of these things really soon

dan ill send you a pic of the xd after dumped on coilovers .and ill check and see if the toe stayed or changed. so far tire wear isnt showing anything yet but the trip to az will be its biggest test. ill keep u posted

sweet I will be waiting :D

welcome to the site dan. really interested in these but i'll have to grab another set of rims first. so we will see. i don't think i like the look of my set up if i threw these on.