Originally Posted by XDevolution (Post 14316)

steve see the intake you made, thats how i started with a spectre filter and stock intake tract. if you really want a more noticable difference, the filter should ve been either a knn or like a aem dryflow. and see that rubber pipe with that awkward pole coming out of it right after the maf? you could actually replace it with a 22 degree bend pipe from autozone (located with all the intake parts) it not only looks more official it actually smooths out the airflow because there are no ridges in the pipe. just a suggestion.

Originally Posted by wheeliesteve (Post 14318)

Hey, thanks for the advice. I will definitely look into that. It seems like that pipe is 3 1/2" diameter. I think at my local autozone they only had those pipes you're talking about in 3" diameter but I will double check.

Originally Posted by 1sweetxd (Post 14319)

if i'm not mistaken there is a rubber adapter that converts the tubing from 3" to 3 1/2"

i did my filter just like you but added the chrome bend pipe xdevolution was speaking of

Originally Posted by wheeliesteve (Post 14321)

Do you have a pic of your setup?

Originally Posted by 1sweetxd (Post 14322)

yea i do. a couple of them. just go to my page and check out my picture album. got pictures of pretty much everything in there.

Originally Posted by wheeliesteve (Post 14323)

That looks good! What did you do about the electronic piece or sensor that plugs into the tube before the filter?

Originally Posted by wheeliesteve (Post 14318)

Hey, thanks for the advice. I will definitely look into that. It seems like that pipe is 3 1/2" diameter. I think at my local autozone they only had those pipes you're talking about in 3" diameter but I will double check.

Originally Posted by XDevolution (Post 14345)

The part u connect ur cone filter to is 3.5" your correct but the actual inner diamter of the mass airflow pipe is 2.38" you have to try and get a pipe as close in diameter as the maf pipe. Im running a 3" pipe now but im gonna reduce it to 2.5". Alot of the aftermarket companies do a stepped pipe set up. Theyll do 2.5"-2.38"-2.5". As the pipe diameter. A good intake to look at is the dc sport intake. Thats a great example to look at.