Originally Posted by xDTool
I'd make sure that the E-brake ground for the radio doesnt work the way mine is supposed to, which is you need to engage, disengage, and reengage the parking brake for the radio to recognize it (I'm guessing you are trying this stopped with the e-brake engaged?). Also for the RCA cable that you got in, it was a yellow/red/white composite set right? which would make it not for the rear camera? or are you telling us that it is labeled as both? I'm also guessing that the cable is rca composite + ground on one end and a harness plug on the other end? if not check double check all of your inputs into the head unit to make sure things are going into the right place... If so, then maybe test your contacts to make sure the cable is good.
Pictures could also help us try to help you if someone notices something wrong that you might not have caught.
|
Humm - didn't try the on-off-on method. How did you find out about that? It wasn't in any of the instructions.
As for the red/white/yellow cables I assumed they were also for the rear camera because of the two other wires to connect. One is the afformentioned ground to the e-brake, the other is supposed to connect to a reverse wire (thus telling the radio you are in reverse and kick on the camera). Anyway the Scion salesman called me back today and I'm supposed to get a call from someone at both Alpine and Scion accessories. I'm going to feel like a fool if there is an on-off-on procedure for the e-brake!