Scion XD Forum - View Single Post - Rear Alignment

ramrat1 · 07-01-2010, 01:21 PM

I did a search again and apparently trd instructions has new alignment specs for the spring

actual left Actual Right trd specs
front total toe .06 .08 1.4 +/- 2.0mm (.06 +/- .08in)
rack end lengths difference did not have specs 1.5mm (.059 in) or less
camber -.7 -.9 -0.18 +/- .75
caster 5.1 4.2 4.85 +/- .75

rear toe in .34 .27 3.4 +/- 3.0mm (.13 +/- .11in)
camber -1.1 -.9 -.95 +/- .5

It looks like i am in specs with the new TRD specs vs the specs from factory with stock springs.

I though it was odd as well that the rear springs would have caused changes to the rear toe but the stock spring specs is different than trd spring specs for alignment.

07-01-2010, 01:21 PM	#4
ramrat1 Junior Member Join Date: Mar 2010 Name: Fred Age: 53 Posts: 29	I did a search again and apparently trd instructions has new alignment specs for the spring actual left Actual Right trd specs front total toe .06 .08 1.4 +/- 2.0mm (.06 +/- .08in) rack end lengths difference did not have specs 1.5mm (.059 in) or less camber -.7 -.9 -0.18 +/- .75 caster 5.1 4.2 4.85 +/- .75 rear toe in .34 .27 3.4 +/- 3.0mm (.13 +/- .11in) camber -1.1 -.9 -.95 +/- .5 It looks like i am in specs with the new TRD specs vs the specs from factory with stock springs. I though it was odd as well that the rear springs would have caused changes to the rear toe but the stock spring specs is different than trd spring specs for alignment.