View Single Post
Old 07-26-2011, 04:59 PM   #10
 
bobolinko's Avatar
bobolinko
Member
Full Access Member
 
Join Date: Jun 2009
Location: Hawaii - Moved to Everett WA 2012
Name: Bob
Posts: 87
Default
Originally Posted by XDevolution View Post
when reffering to the flat iron are you talkin about the mounting brackets purchased at home depot? cus im really interest in this project. and did you paint it yourself or it came like that.
just bought the flat-iron from Home Depot and bent it to the angles I wanted in a vise, sanded drilled and painted them red like in the pix. took about 1.5 hours start to fini. It is REALLY quite simple. The shock tower bolts are a little hard to put in, cause the bolts need to be short enough to fit in the hole and clear the heads, but long enough to have a secure mount. The Bracket is easy enough to adjust by twisting, bending even after bolting to the shock towers, and before putting on the Damper assembly. The damper I got came with a 90 degree mount which I attached to the left side, front (by the engine cover) There was an un-used threaded hole there already.

hope this helps you!
bobolinko is offline   Reply With Quote