View Single Post
Old 11-09-2010, 11:25 PM   #10
XDevolution
Senior Member
Full Access Member
 
Join Date: Sep 2010
Name: Anthony
Age: 33
Posts: 223
Default
Well the problem with the spectre pipe is that its a 3 inch diameter, our maf reads 2.5 inches. with increasing the piping diameter you increased the volume but decreased the air pressure/flow to the manifold making the air to lean and not allowing for proper air to fuel ratio to mix, inturn shutting down your car. I experienced this and it took me awhile to understand why but, with the part that mentioned up top #9405, that comes with a better selection of maf mount adapters as well as the the polished pipe with internal sleeves. what i mean is you use the 3 inch maf pipe, but have the option to put an internal sleeve pipe to make proper diameter adjustments, more or less it looks like a pipe inside of a pipe. you really gotta check the spectre site or just go autozone and ask them about spectre part 9405 it will definitely work.

---------- Post added at 11:25 PM ---------- Previous post was at 11:19 PM ----------

has the original post helped anybody?


__________________
XD RS 1.0 =
XDevolution is offline   Reply With Quote