Scion XD Forum - View Single Post

YELOSUB · 11-24-2009, 09:50 PM

I am currently running a 18X8 in a 35 offset...As long as you leave the supsension alone and keep the TRD springs you WILL NOT have any issues with rubbing...Where I ran into problems is that I wanted to go lower and widen my stance so I swapped out my springs for Tanabe DF's and tried to run 10mm, then eventually 5mm spacer shims in the rear but it still rubbed...Even without spacers and the Tanabe DF's, I rubbed with passengers or over bumps so I had to do this to fix the problem:

Nothing a little grinding couldn't fix

Here is the final product:

This is my goal one day:

11-24-2009, 09:50 PM	#10
YELOSUB OG Member Full Access Member Join Date: Aug 2009 Location: AZ Name: Tim Age: 55 Posts: 422	I am currently running a 18X8 in a 35 offset...As long as you leave the supsension alone and keep the TRD springs you WILL NOT have any issues with rubbing...Where I ran into problems is that I wanted to go lower and widen my stance so I swapped out my springs for Tanabe DF's and tried to run 10mm, then eventually 5mm spacer shims in the rear but it still rubbed...Even without spacers and the Tanabe DF's, I rubbed with passengers or over bumps so I had to do this to fix the problem: Nothing a little grinding couldn't fix Here is the final product: This is my goal one day:
	__________________ ***RANDODE***