Post your suspension specs and your reviews on them.
Tanabe DF210 springs:
front drop: 1.9"
rear drop: 2.2"
I've had them on since the first day I bought the xD, was my first mod.
Absolutely LOVE them!
I highly recommend the df210's for anyone that wants an aggressive drop without losing ride quality. Been running them for almost a year now and the ride is still great.
First impressions are it's reeeaaallly low compared to stock height. You'll notice significantly less body roll and the car just feels more planted to the ground.
I have the 5Axis lip kit on mine and haven't had any issues with ground clearance, as long as you are familiar with driving a lowered vehicle.
I also have 18x8" wheels with +45 offset and 225/40/18 tires with no rubbing issues, so you are safe with that setup.
Pros:
aggressive drop
excellent ride quality
Cons:
could limit wheel size/offset because it's such an aggressive drop
could have rubbing issues if installing a really large speaker setup in the back
Cons:
could limit wheel size/offset because it's such an aggressive drop
could have rubbing issues if installing a really large speaker setup in the back
VERY true about the speaker system. I for one have a fairly large set up, and its caused my rear springs to settle about an inch lower than the front...
VERY true about the speaker system. I for one have a fairly large set up, and its caused my rear springs to settle about an inch lower than the front...
Name: Enter your name or name you wish to be refered to as.
Age: 39
Posts: 56
Originally Posted by rhino74s
could have rubbing issues if installing a really large speaker setup in the back
i havent noticed any rubbing, but if i put somebody in the back seat i scrape on damn near every speed bump no matter how small or how i drive over it. but i definately love the df210 springs.
I have the TRDs as well. The look with the DFs is outstanding, but my driveway is so steep and the angle so sharp, the only way to get into it is to approach it at an angle and creep in slowly. If I installed DF 210s I'd never make up my driveway without ripping off the front lip.
hey all, I installed Progress springs on my xD just yesterday, they have pretty much the same drop as the Tanabe DF's, about 2.0"/2.2" going by my own measurements... but my front two tires are scraping the wheel well liner right at the lip, over every little dip or bump in the road... I got 18x7.5 Kitana wheels with a 45 offset, and 225/40/18 tires. Not sure what I want or can do to cut down on the rubbing, without costing me a fortune like switching to 215 wide tires...
I wonder if wheel spacers would help. I believe you have to run the proper front wheel offset to avoid rubbing without them. there is also rear wheel hub spacers which unfortunately wont help your situation, but are an interesting alternative for some applications. > http://www.penguingarage.com/HubSpacers/Spacer.html
Well, spacers would not work, that's going in the wrong direction... my tires are scraping the wheel well lip, so putting spacers on would just move the wheels out even further, putting the tires closer to the lip... I actually would need wheels with a higher offset number so that the wheels would be centered closer to the inside of the car...
I am running TRD's I have 17x8 +35et, I occationally rub on really hard bumps, but only because of my body kit... It rubs right on the edge of where the rear bumper mounts to the quarter panels...
Well, if you think about it logically, the diameter of your wheels (16" 17" 18" 20") has absolutely NOTHING to do with whether the tires will rub or not, it's strictly the dimensions of your TIRES (outside diameter and width) and the OFFSET of the wheels (which determines where those tires will be located horizontally along the "axle" within the wheelwell) that are the only responsible factors...
If you put a larger wheel on your car, your going to put on lower profile tires, to keep the outside diameter of the tire as close as possible to the diameter of stock tires so your speedometer and odometer remain accurate. So no matter if your wheel is 15" or 20", the tire is still going to end up being the same diameter as the stock tire, unless you're purposely putting the wrong size tires on your new rims (which would then require a speedometer adjustment to correct the difference in tire diameter)... now of course, if you mount a wider wheel, then the tire is going to be wider, but it's still basically the overall width of the tire and not the width of the wheel that would be the cause of any rubbing issues or not...
As for offset, most aftermarket wheels already have a proper offset figured into them if they are wider than stock wheels; very few wheel models even give you a choice of different offsets anyway...
I just think some people tend to overlook these facts, worrying about whether replacing the stock 16" wheels with 18" wheels on their car will cause rubbing problems, when in really the wheel diameter has no bearing whatsoever...
__________________
"The Cylons look like us now... they're not just frakkin' Toasters anymore..."
IM dropped on Tanabe Coilvers and need to get some rubber on my wheels then i will mount them and take some pics wheel specs are 18 x9 rear and 18 x 8.5 front... should be pretty sick : )
Coilovers drop just over 3 inches front and 3 1/2 rear : ) and best riding coilovers i have ever driven on...
Hybrid Mode
