Rear Alignment - total toe out of spec

[ramrat1]

I completed the install with the helpful instructions provided. Its interesting how 1.5 inch drop can make the car from feeling high to feeling much lower to the ground.

I let the car sit for a few days and drove it roughly 20 miles. I then took it in for an alignment.

I can't believe just the springs would do this. What should be done (if anything). Do I need to bring it into the dealer to have shims installed. Would it be covered under guarantee as I can't see just installing trd springs would bring it out of spec (it must have been out of spec before with stock springs). Car has under 5k miles.

fronts were in spec - no change done.

rears all were in spec except the toe

rear left
actual .34
specified range .02 to .25

rear right
actual .27
specified range .02 to .25

total toe
.61
specified rante .03 to .50