Vinyl Wheel Stripes

[BowdilxD]

Originally Posted by TheLittleDeviant The stock wheels are around +45 offset, so expect the Nexo wheels to sit the same as the steelies.

Thanks! That was my next question, what offset are the stock wheels.

[TheLittleDeviant]

No problem, you will be safe is you stay under 8.5 inch wide wheels, and an offset with a number between +30 and +45.

[YELOSUB]

Originally Posted by rhino74s so you have TRD springs then, you could prolly do +35 offset with those. Generally the lower the offset the deeper or more lip the wheel has. That's why we're limited on deep dish wheels, we don't have alot of space under there for really low offsets.

Ryan speaks the truth...I have experimented with several offsets by using Randode.com spacers...Here is what I found:

18" x 7.5" Enkei Super7's in a 45 offset/TRD Springs/No rubbing

18" x 7.5" Enkei Super7's in a 45 offset/TRD Springs/with 10mm Randode Spacers only rubbed in rear on BIG bumps

18" x 8" Axis Decades in a 35 offset/Tanabe DF210's/with 10mm Randode Spacers/Will not fit even after grinding inner fender

18" x 8" Axis Decades in a 35 offset/Tanabe DF210's/with 5mm Randode Spacers/Rubs too much to drive, need to run a stretched tire

18" x 8" Axis Decades in a 35 offset/Tanabe DF210's/Grinded Inner Fender Lip Down/ No Rubbing