I actually used those spectre parts from auto zone and made my own custom intake for the car. The only situation I ran into was pipe diameter. Our throttle body works best with 2.5 inch piping diameter. What I did was remount the maf closer to the throttle body with a coupler followed by coupling an 8 inch 22 degree elbow pipe. I have a k n n cone filter 3 inch diameter. So my intake closely resembles those of hiprospeed. The only difference is the fact that I have an aftermarket 3 inch diameter pipe coupled to the stock maf mount pipe of 2.5 inch diameter. I feel a huge difference in throttle response, take off, and definetly a benefit for mpg's I gaind about 3 mpg's on average since I installed it. I spent about $55 at max for all that. That's 2 couplers, 1, 22 degree bend pipe and a filter of your choice. I recommend fitting a 3 inch coupler extremely tight to the throttle body, the 2.5 inch one will just slide right off. But good luck with your car
