Go Back   Scion XD Forum > xD Modification > General Discussion

General Discussion Discuss anything in general with your Scion xD here.


Reply
 
Thread Tools Display Modes
Old 10-19-2009, 02:04 PM   #1
 
bobolinko's Avatar
bobolinko
Member
Full Access Member
 
Join Date: Jun 2009
Location: Hawaii - Moved to Everett WA 2012
Name: Bob
Posts: 87
Default Cat & PreCat Removal
I want to replace my precat and cat with a high flow cat.
I have been searching, but cannot find any place that has a replacement down-pipe with the high flow cat already installed.

is there anyone that has successfully removed the pre-cat and installed a high-flow cat on this forum?

does anyone know where I can get the pipe with the cat already installed with the necessary O2 sensors and the antifouler bungs already on?

I'd sure like to get all the HP out and get the miles for my gallon of gas that is becoming again, high priced!

If anyne has any information on this, please let me know where/how I can get this done. Thanks!!!
bobolinko is offline   Reply With Quote
Old 10-19-2009, 09:17 PM   #2
 
Cylon_xD's Avatar
Cylon_xD
OG Member
Full Access Member
 
Join Date: Jun 2009
Location: Amish Country Lancaster, PA
Name: Troy
Age: 63
Posts: 547
Default
Cat:



Pre-cat:



Hi-flow Cat:



Sorry, couldn't resist... I've been drinking a bit tonight! *hic!*


__________________
"The Cylons look like us now... they're not just frakkin' Toasters anymore..."
Cylon_xD is offline   Reply With Quote
Old 10-20-2009, 02:15 AM   #3
 
bobolinko's Avatar
bobolinko
Member
Full Access Member
 
Join Date: Jun 2009
Location: Hawaii - Moved to Everett WA 2012
Name: Bob
Posts: 87
Default LOL - ROF Thanks !!
Thanks Troy,
However . . . .
looks like ya ain't getin no pussy t'nite coz it don't go wi drikin...
ha ha ha
Aloha Nui Loa From Hawaii
bobolinko is offline   Reply With Quote
Old 10-21-2009, 06:57 PM   #4
 
TheLittleDeviant's Avatar
TheLittleDeviant
That Admin Guy
Full Access Member
 
Join Date: Jun 2009
Location: Clinton, MA
Name: Ted
Age: 42
Posts: 1,069
Default
^^^ Nice, Troy

Bobo, I havent seen any companies that makes them ready for install, BUT, you can hit up any muffler shop and get it done at a decent price. One of my buddies did this on his xD, along with the exhaust, came out real good and he only spent like $300 on it.


__________________
|Custom Engine Covers|
vvvvvvvvvvvvvvvvvvv
Click here!
TheLittleDeviant is offline   Reply With Quote
Old 10-21-2009, 08:35 PM   #5
 
bobolinko's Avatar
bobolinko
Member
Full Access Member
 
Join Date: Jun 2009
Location: Hawaii - Moved to Everett WA 2012
Name: Bob
Posts: 87
Default Yo
Yo Troy,
Like we say here....

Mahalo Nui loa (Thank you very much)
I'll look into that.
I'm researching all my options and will make a move soon...
bobolinko is offline   Reply With Quote
Old 10-22-2009, 07:18 AM   #6
 
TheLittleDeviant's Avatar
TheLittleDeviant
That Admin Guy
Full Access Member
 
Join Date: Jun 2009
Location: Clinton, MA
Name: Ted
Age: 42
Posts: 1,069
Default
Let us know how it goes and post some pics when you have the set up your looking for.


__________________
|Custom Engine Covers|
vvvvvvvvvvvvvvvvvvv
Click here!
TheLittleDeviant is offline   Reply With Quote
Old 10-31-2009, 10:50 AM   #7
 
bobolinko's Avatar
bobolinko
Member
Full Access Member
 
Join Date: Jun 2009
Location: Hawaii - Moved to Everett WA 2012
Name: Bob
Posts: 87
Default Installed a Hi-Flow Now get CEL
I put in a High-Flow but still get CEL after a few miles like regular, even with the CEL Fixer. I got the O2 SIM, but want to install it under-dash instead of under-car. I just don't know where the ECU is. Bit of a noob here. Also if anyone knows which of the wires to the ECU would be the last O2 Sensor and maybe what colors they are, I could put in the SIM module. The SIM seems to generate a lot of heat, as the mfg wants it mounted to a metal surface, using silicone heat transfer compound..... Anywayz, I'd appreciate any light you can throw on the subject to make the install a little easier for me. Thanks again, and Aloha from us over here !
bobolinko is offline   Reply With Quote
Old 11-03-2009, 05:56 PM   #8
 
xdblues's Avatar
xdblues
Junior Member
 
Join Date: Oct 2009
Location: Pensacola, Fl
Name: Ana & Chris
Age: 40
Posts: 14
Default
the ecu is in the engine bay on the right hand side bolted to the top of the fire wall
xdblues is offline   Reply With Quote
Old 11-04-2009, 08:50 AM   #9
 
TheLittleDeviant's Avatar
TheLittleDeviant
That Admin Guy
Full Access Member
 
Join Date: Jun 2009
Location: Clinton, MA
Name: Ted
Age: 42
Posts: 1,069
Default
Originally Posted by xdblues View Post
the ecu is in the engine bay on the right hand side bolted to the top of the fire wall
Passenger side


__________________
|Custom Engine Covers|
vvvvvvvvvvvvvvvvvvv
Click here!
TheLittleDeviant is offline   Reply With Quote
Old 11-12-2009, 11:56 AM   #10
mcbrew
Senior Member
Full Access Member
 
Join Date: Aug 2009
Location: Annapolis, MD
Name: Jesse
Age: 48
Posts: 130
Default
According to my info, the O2 sensor (bank 1, sensor 2) should have a gray wire and a light green wire coming out of it. At a connector, the gray wire changes to pink and the light green changes to red. That's what you should find at the computer at locations 47 and 87.


__________________
-McBrew

Current car: 2011 Subaru Outback 2.5i Premium w/ Lineartronic CVT transmission. Steel Silver.

SOLD: 2009 Scion xD - BRM, 16" alloys, VSC, K&N drop-in air filter, Thule Aero roof bars, TRD sway bar, TRD short shift, TYC LED tails, Curt class-1 tow hitch, Italian leather shift & brake boots, Red Line MT-90 in the trans, Amsoil 0w20 in the engine, ATE SuperBlue Racing brake fluid.
mcbrew is offline   Reply With Quote
Old 11-12-2009, 01:22 PM   #11
 
bobolinko's Avatar
bobolinko
Member
Full Access Member
 
Join Date: Jun 2009
Location: Hawaii - Moved to Everett WA 2012
Name: Bob
Posts: 87
Default Thanks Guys !!
I have ended up yanking the SIM out and installing a Strup CEL Elimator that is the "L" shaped type. If NE1 ever wants to install this, you'll have to DROP THE CAT PIPE AND BOTH HANGERS ON THE RESONATER in order to install the device. If you do as I recommend, then the Strup will JUST MAKE THE TURN when you screw it into the bung. They made it EXACTLY long enough to fit. It's hard to do it with just using Rhino Ramps, cause there is not enough room, but I was able to finish the install, and so far, it seems to have managed to elude the CEL and Catalytic PO420: "Catalyst System Efficiency Below Threshold" codes and others that were being thrown. Hopefully that's the end of my adventures with my cat.
bobolinko is offline   Reply With Quote
Old 11-12-2009, 01:48 PM   #12
 
TheLittleDeviant's Avatar
TheLittleDeviant
That Admin Guy
Full Access Member
 
Join Date: Jun 2009
Location: Clinton, MA
Name: Ted
Age: 42
Posts: 1,069
Default
Originally Posted by bobolinko View Post
I have ended up yanking the SIM out and installing a Strup CEL Elimator that is the "L" shaped type. If NE1 ever wants to install this, you'll have to DROP THE CAT PIPE AND BOTH HANGERS ON THE RESONATER in order to install the device. If you do as I recommend, then the Strup will JUST MAKE THE TURN when you screw it into the bung. They made it EXACTLY long enough to fit. It's hard to do it with just using Rhino Ramps, cause there is not enough room, but I was able to finish the install, and so far, it seems to have managed to elude the CEL and Catalytic PO420: "Catalyst System Efficiency Below Threshold" codes and others that were being thrown. Hopefully that's the end of my adventures with my cat.
Do you have any pics of it installed?


__________________
|Custom Engine Covers|
vvvvvvvvvvvvvvvvvvv
Click here!
TheLittleDeviant is offline   Reply With Quote
Old 11-12-2009, 02:52 PM   #13
 
bobolinko's Avatar
bobolinko
Member
Full Access Member
 
Join Date: Jun 2009
Location: Hawaii - Moved to Everett WA 2012
Name: Bob
Posts: 87
Cool Pics
Next time I crawl under, I'll shoot the pix.
bobolinko is offline   Reply With Quote
Old 11-12-2009, 04:06 PM   #14
 
TheLittleDeviant's Avatar
TheLittleDeviant
That Admin Guy
Full Access Member
 
Join Date: Jun 2009
Location: Clinton, MA
Name: Ted
Age: 42
Posts: 1,069
Default
^^^Awesome, I want to take a peek at it.


__________________
|Custom Engine Covers|
vvvvvvvvvvvvvvvvvvv
Click here!
TheLittleDeviant is offline   Reply With Quote
Old 11-19-2009, 09:54 PM   #15
 
bobolinko's Avatar
bobolinko
Member
Full Access Member
 
Join Date: Jun 2009
Location: Hawaii - Moved to Everett WA 2012
Name: Bob
Posts: 87
Default
Finally !
No codes yet, and it's been a week instead of 8 miles....

bobolinko is offline   Reply With Quote
Old 11-20-2009, 08:45 AM   #16
 
TheLittleDeviant's Avatar
TheLittleDeviant
That Admin Guy
Full Access Member
 
Join Date: Jun 2009
Location: Clinton, MA
Name: Ted
Age: 42
Posts: 1,069
Default
Excellent! Glad to hear it took care of the situation! and yes that is a tight fit up there, thanks for the pic!


__________________
|Custom Engine Covers|
vvvvvvvvvvvvvvvvvvv
Click here!
TheLittleDeviant is offline   Reply With Quote
Old 11-20-2009, 10:14 AM   #17
 
Tim.TRDSparks's Avatar
Tim.TRDSparks
Member
 
Join Date: Aug 2009
Location: Myrtle Beach, SC
Name: Sparks Toyota
Posts: 47
Default
Can you take a sound clip or video of what she sounds like now? I am just curious to know this. Thanks!


__________________
TRDSparks.com
Sparks Toyota/Scion
Myrtle Beach, SC
Friend us on Facebook
Tim.TRDSparks is offline   Reply With Quote
Old 11-20-2009, 11:09 AM   #18
 
bobolinko's Avatar
bobolinko
Member
Full Access Member
 
Join Date: Jun 2009
Location: Hawaii - Moved to Everett WA 2012
Name: Bob
Posts: 87
Default Sounds the same
The sound without any cats was a louder "dry" sound and not "nice" at all.... After the high flow cat was put in it got back to exactly the same as the stock setup with the stock muffler on. I have not yet put back the magnaflow, but I anticipate it to be the same as well.


P.S.
I got my fogs and filters from you

Last edited by bobolinko; 11-20-2009 at 11:13 AM.
bobolinko is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump