• Welcome to ScionXDForum.com! The Scion xD owners community: mods, engine and suspension tech, audio, DIY write-ups, meets and classifieds. Every 2008-2014 xD owner (and Toyota Urban Cruiser and Ist fans) is welcome. Registration is FREE, fast and simple: join us today!

No High Beam Indicator after install HID

bobolinko

Original Owner
Joined
Jun 26, 2009
Messages
87
Reaction score
0
Location
Hawaii - Moved to Everett WA 2012
I was bothered by the high beam indicator not illuminating after installing a HID kit. I searched all over to find the fix but noplace did I find one. E-bay sells a Fix Module for 20 bucks and 8 bucks shipping. I was not going to spend that much, figuring the fix might just cost a few bucks. Well, after 2 days of hunting for wiring diagrams and reading about how the Toyota light circuit worked, I got the fix !!! the super Simple fix is shown below. Mine now works fine. All it takes is one resistor connected to the Low Beam Circiut and the other end to 12v. Cost to do could be as low as 50 Cents!

NoHiBeamIndicatorFix.jpg
 
Last edited:
hmmmm.... must depend on the HID kit you get. My high beam indicator works fine with my HID's but my kit does have a separate high beam bulb. I never need my high beams anymore though.
Nice fix though, love the small technical tweaks to improve things.
 
Hmmm....

Could it be because I have installed Bi-Xenons? I have Xenon Hi and Xenon Low, and no Halogen bulb in the housing. The bulb's low beam fillament actually fed the power to the hb indicator led (when th low was not illuminated)

there are a whole bunch of ther Toyota guys that have the same prob due to the way Toyota's system is a ground start circuit.

Maybe your harness that was supplied changed how the power went back to the hb indicator led.

E-bays solution for 28 bucks gave me a shiver . . . . .
 

Trending content

Members online

No members online now.

Forum statistics

Threads
1,524
Messages
13,838
Members
1,267
Latest member
websitedesign4545
Back
Top